Migrating

Here are steps required to migrate to certain versions:

1.x -> 2.x

To migrate from v1, you will need to change all divider calls from:

area4.dividerX
# or
area4.divX()

Where X is the divider number, to:

area4.divider(X)

2.x -> 3.x

This version removed the duplicate divider (was #201), so all the dividers with numbers/IDs BIGGER than 201 need to be shifted down by 1, so if you are using any of those dividers, you will need to change the number. For example:

area4.divider(208)
# needs to be changed to:
area4.divider(207)

# however, anything BELOW 201 does NOT need to be changed!